SD card is the most convenient thanks to expand the memory of any memory, save data, and it’s very easy to shift the memory card to the other device.
This storage is reliable and additional in all probability there are no problems found with it anyhow. One issue that’s faced by the users for the memory card is that the bally issue of the sd card.
whereas if the sd card crashes then the total information within it’s ruined and therefore the user is unable to access it.
If you’re interested to understand concerning the strategy then please go and browse out the total data given during this page until the end.
we tend to believe that this is often enough for the introduction of the post, we must always currently begin with the method below!
Table of Contents
How to Repair a Crashed SD Card and Protect your Data
We are going to state some of the methods that you could follow so as to get your SD card repaired. Please check all of the different steps given below.
#1 Check On Other Computer
Well, before continuing to the more strategies, it’s vital to check whether or not the sd card is absolutely corrupted or not. it’d be the fault within the software system that’s resulting in the sd card issue.
So, before continuing to the more strategies, connect the sd card to a different device. If the sd card isn’t corrupted, then it’ll show files on the various computer.
Check On Other Computer
#2 Assign Different Drive Letter
Sometimes, Windows software system fails to assign a drive letter to connected devices. even if it’s assigned a drive letter, it fails to browse it.
So, before continuing to consecutive methods, ensure to assign a brand new drive letter to associate unreadable sd card. For that, click on the beginning button and on the search button look for ‘Disk Management’.
Open Disk Management from the list, right click on the drive on that you would like to assign a brand new letter and so choose the choice ‘Change Drive Letter and Paths’
#3 Repair Using CMD (how to format corrupted sd card)
The great thing is that you can probably fix the corrupted or crashed SD card via CMD. Just follow some of the simple steps listed below to repair crashed SD card using CMD.
Step 1. First of all, connect the corrupted or crashed SD card to your computer.
Step 2. Open CMD and enter ‘diskpart’
Step 3. In the next step, type in list disk and press Enter. Now you will see all the disk that’s attached to your computer.
Repair Using CMD
Step 4. Now you need to type in select disk 1. Make sure to replace the ‘disk 1’ with the disk number given to your SD card.
Step 5. In the next step, type ‘clean’ and press the Enter button.
Step 6. Next, type in ‘create partition primary’ and then press the Enter button.
Step 7. Now, type in ‘active’ and then hit Enter.
Step 8. Now, type in ‘select partition 1’ and then press Enter.
Step 9. We are almost done! Now in the last step, we need to format the newly created partition. For that, type in ‘format fs=fat32’ and hit Enter.
That’s it, you are done! This is how to repair damaged sd card using cmd. If you have some other doubts, then make sure to discuss with us in the comments.
